Front Loader
Skid Steer Loader
Intended for skid steer mounting, Simex wheel saws offer different solutions for working on hard or compact surfaces, including asphalt, cement and rock: cuts and small trenches, set-section trenches, mini- and micro-trenches for fiber optic cable installation. Full wheel protection at any working depth ensures maximum safety of persons and property.
Features
-
CLEAN TRENCH
-
MAX. SAFETY
-
HIGH PERFORMANCE
-
HIGH CUTTING FORCE
Models
T 200
Features mechanical side shift
| Trench Width | Trench Depth | Operating weight with standard wheel (1) | Required oil flow |
|---|---|---|---|
|
25-30-40-50 mm |
200 mm |
270 kg |
35-75 l/min |
|
1-1,2-1,6-2 inch |
8 inch |
600 lbs |
9-20 gpm |
T 300
Features hydraulic side shift and trench clearing device
| Trench Width | Trench Depth | Operating weight with standard wheel (1) | Required oil flow |
|---|---|---|---|
|
25-30-50-80 mm |
300 mm |
665 kg |
60-115 l/min |
|
1-1,2-1,6-3,2 inch |
12 inch |
1460 lbs |
16-30 gpm |
TA 300
Ideal for laying fiber optics, fitted with hydraulic lateral tilt allowing wheel saw to stay vertical in any condition, even when the prime mover is not parallel to the road surface. Also available with conveyor belt.
| Trench Width | Trench Depth | Operating weight with standard wheel (1) | Required oil flow |
|---|---|---|---|
|
25-30-50-80 mm |
300 mm |
845 kg |
60-115 l/min |
|
1-1,2-1,6-3,2 inch |
12 inch |
1860 lbs |
16-30 gpm |
T 450
Features hydraulic depth adjustment, hydraulic side shift and trench clearing device. Possibility of side discharge of material. Set up for installation of aspiration and conveyor belt.
| Trench Width | Trench Depth | Operating weight with standard wheel (1) | Required oil flow |
|---|---|---|---|
|
50-80-100-130-160-200 mm |
150-450 mm |
1115 kg |
100-160 l/min |
|
1,6-3,2-4-5-6,3-8 inch |
6-17 inch |
2450 lbs |
27-42 gpm |
T 600
Hydraulic depth adjustment, hydraulic side shift, trench clearing device, Â side discharge of material. Set up for installation of aspiration and conveyor belt.
| Trench Width | Trench Depth | Operating weight with standard wheel (1) | Required oil flow |
|---|---|---|---|
|
80-100-130-160-200 mm |
200-600 mm |
1340 kg |
110-170 l/min |
|
3,2-4-5-6,3-8 inch |
8-24 inch |
2950 lbs |
29-45 gpm |
T 800
Compared to the other models of the T range, the T 800 is fitted with an integrated motor in the wheel that enters the trench and goes down to a depth of 800mm without excessively increasing the wheel diameter. The T 800 is also the only one that can work in reverse.
| Trench Width | Trench Depth | Operating weight with standard wheel (1) | Required oil flow |
|---|---|---|---|
|
250 mm |
450-800 mm |
1430 kg |
110-170 l/min |
|
10 inch |
17-31 inch |
3150 lbs |
29-50 gpm |